e-mail :

Registered in England and Wales company # 03449181.
 This website does not use cookies.

 © Copyright: Conwy Valley Systems Limited  2000-2024

Conwy Valley Systems Limited,

West Acre, Llys Helyg, Deganwy

CONWY LL31 9BN, United Kingdom.

VAT# GB 741 5190 48


A Geoscience Wales  founding member.

PETROG includes patent protected technology.

PETROG Home PETROG Home PETROG search

Hardware and Software


PETROG 5 runs on the following Microsoft platforms : Windows 10 & 11 (64 bit).


It may run on earlier Windows versions, but they are no longer supported or tested.


No other operating systems are supported. It is important to ensure that the camera you select to use with PETROG is also supported on that platform with the necessary drivers.


Please ensure that your computer also meets the system requirements of your selection of camera. Some cameras require fast CPUs, large amounts of memory and specific operating system versions to function.


We would recommend 8Gb of RAM is recommended for PCs running PETROG, and 4Gb for PetrogLite.


Due to the large number of images involved, a lot of storage space is required for PCs running PETROG. We recommend at least 200GB of hard disk space for the storage of images, and further storage such as a DVD writer drive for the archival of image files.


Stepping Stage


PETROG is supplied with a digitally controlled high-precision Stepping Stage, to replace the discontinued Prior Scientific Instruments / Hacker Instruments electro-mechanical stepping stage (model J0415C). The digital Stepping Stage requires a USB 2.0 port for connection to the controlling computer.


Camera


The user interface incorporates video images from a colour microscope-mounted video camera. CVS normally supplies PixeLINK cameras or TIS cameras but a wide range of other cameras are supported. The camera should be a high resolution camera, suitable for collecting images that will later be required for hardcopy production.


All cameras have to be attached to a polarising photomicroscope using a C-mount adapter. The specific model of adapter used is dependent on the microscope. Supported digital cameras require specific connections usually USB3.0/USB3.1/USB3.2 or IEEE 1394/800 ("Firewire").

Ensure that the selected camera is supported on the appropriate Microsoft Windows™ platform.


Firewire


If your camera requires a IEEE 1394 "Firewire" interface you should check carefully with the manufacturer to see if your camera requires a 4-pin or 6-pin connection. A 6-pin connection provides a power supply and some cameras have a requirement for the power supply. You can add power supply to a 4-pin connection by using a Firewire hub which has it's own power supply. Note that Sony may refer to the 4-pin Firewire connection as iLink.


There are also two speeds of connection Firewire 400 and Firewire 800. The 800 pin connection is a different type of connector. If a Firewire 800 connection is required, then attempting to use Firewire 400 will result in the system not  functioning correctly, the malfunction manifests itself differently depending on the camera make and model.